Posts

Showing posts with the label Zilmet pressure tanks

Stainless Steel Cycle Stop Valve Constant Pressure System with ZS18 Stainless Steel Pressure Tank

Image
  The Cycle Stop Valve Constant Pressure System is an effective way to have steady water pressure, reduced pump cycling, and a reduced pressure tank size all without using a variable frequency drive (VFD) constant pressure system. The CSV1A Stainless Steel Cycle Stop Valve can automatically adjust pump output to match variable flow requirements. It is a pressure adjustable valve, and can handle from 1-25 GPM. All Stainless Steel Components: 1 1/4" MPT x 1 1/4" Barb Check Valve (1 1/4" FPT) Cycle Stop Valve #CSV1A (2) Plugs (1/2") Zilmet ZS18 4.8 Gallon Stainless Steel Pressure Tank Coupling (1 1/4" FPT) 1" / 1-1/4" Manifold Plug (1") Hose Bib (3/4" MPT) Pressure Gauge - Back Mount (1/4" MPT) Bushing (3/4" MPT x 1/4" FPT) Nipple (1/4" x 3" MPT) Pressure Relief Valve, preset at 100 PSI (3/4" MPT) Shutoff Valve (1 1/4" FPT) Square-D Pressure Switch, choose from 20/40, 30/50, 4...

Zilmet ZS24V Vertical Stainless Steel Pressure Tank

Image
Zilmet has over 50 years of experience in manufacturing high-quality expansion tanks Produces over 5 million tanks and over 1 million heat exchangers annually. Fully vertically integrated, designing, and manufacturing all diaphragms and bladders internally. Zilmet has created a compact design with a seamless diaphragm that never stretches or creases. There are no bubbles or corners to trap sediment, inhibiting bacterial growth. Features: Butyl diaphragms are suitable for both hot and cold water applications. All tanks are manufactured with 304 stainless steel tanks . All tanks come with a 5-year limited warranty. Uses Include: High corrosive areas Food processing plants Rainwater collection Breweries Water hammer arrestors Auto manufacturers Variable speed pump applications Hospitals and clean rooms Marine applications

Symcom Pump Saver Plus Pump Protector

Image
The Model 233-P single-phase Pump Saver Plus is a pump monitor designed to protect single-phase pumps from dry-well, dead-head, jammed impeller, rapid cycle and overvoltage and undervoltage conditions. The Pump Saver Plus Model 233-P protects 230 volt, 2 or 3 wire, 1/3 to 1.5 hp pumps. A calibration adjustment allows the Model 233-P to be calibrated to your specific pumping applications, thereby reducing the possibility of false or nuisance tripping. A proprietary microcontroller based voltage, power factor and current-sensing circuit constantly monitors for power fluctuations, overcurrent and underload conditions.  When an abnormality, such as loss of suction, is detected, the  PumpSaverPlus deactivates its output relay and directly disconnects the pump motor. The PumpSaver®Plus then begins its user-selectable “Restart Delay” (dry-well recovery) timer. When the timer expires or power is removed and reapplied, the PumpSaver®Plus reactivates its output relay and turns ...

Davey BT20-40, 1.25HP, 230V, 23GPM Max, 78PSI Max, Pressure Boosting Pumps with Torrium Control

Image
Torrium® controlled pump for average to large homes with two stories or long runs of plumbing. Also good for whole house applications from a gravity feed tank. Not recommended for incoming pressure above 20-25 psi. A pressure reducing valve may be used before the Davey pumps to limit the pressure. Benefits Manufactured from highest quality corrosion resistant materials - meets ANSI/NSF61 Torrium offers even pressure without cycling Adaptive cut-in pressure on Torrium allows for installation on higher static head installations Cut-in Pressure - Adapts to 80% of last shut-off head pressure Pump protected from damage caused by dry running Low pressure loss through removable built-in check valve Constructed from corrosion resistant materials High quality, purpose designed electric motor Motor and Pump designed for frequent starts Low Maintenance Discharge may be rotated through 360°, plus 12", high quality, 304 stainless steel braided dis...

Zilmet Stainless Steel Pressure Tanks

Image
Zilmet is an international manufacturer of high-quality expansion tanks, pressure vessels and plate heat exchangers, and a leader in the thermo-hydraulics field. The Inox-Pro Z8, Z12 and Z18 304 Stainless Steel expansion tanks with a food-grade internal membrane are fit for all applications near coastal areas where the presence of brackishness or harsh chemical environments that rapidly corrode all parts made of plain steel. They allow water expansion in domestic heating systems equipped with boilers or heat exchangers. They are also used in every application where ultimate hygiene is required, as in a house or a community. NSF61 Certified for use with potable water. Zilmet Pressure Tanks Zilmet has over 50 years of experience in manufacturing high-quality expansion tanks • Produces over 5 million tanks and over 1 million heat exchangers annually • Fully vertically integrated, designing and manufacturing all diaphragms and bladders internally Zilmet has creat...