Aqua Science

  The CMBE Booster is designed for domestic and commercial water supply, pressure boosting, irrigation and dewatering applications.The CMBE series is available in both 1x110-120V (Grundfos 98810910) and 1x200-240V (Grundfos 98548109) variants and uses energy efficient, permanent magnet motor technology, which provides unmatched reliability, quiet operation, and energy savings.Thanks to the integrated speed controller, the CMBE keeps a constant pressure in the pipe system. A pressure sensor monitoring discharge pressure will signal to the speed controller to change the motor speed to adapt the performance to the new situation. Grundfos booster pumps Features: Constant pressure via integrated speed control Compact design Robust, stainless steel design Easy installation Low energy consumption Dry-running protection Noise level below 55 dBA and even lower at controlled speed The CMBE Booster is a complete pump system preassembled with the following components: CME pump with i...

The Model 233-P single-phase Pump Saver Plus is a pump monitor designed to protect single-phase pumps from dry-well, dead-head, jammed impeller, rapid cycle and overvoltage and undervoltage conditions. The Pump Saver Plus Model 233-P protects 230 volt, 2 or 3 wire, 1/3 to 1.5 hp pumps. A calibration adjustment allows the Model 233-P to be calibrated to your specific pumping applications, thereby reducing the possibility of false or nuisance tripping. A proprietary microcontroller based voltage, power factor and current-sensing circuit constantly monitors for power fluctuations, overcurrent and underload conditions.  When an abnormality, such as loss of suction, is detected, the  PumpSaverPlus deactivates its output relay and directly disconnects the pump motor. The PumpSaver®Plus then begins its user-selectable “Restart Delay” (dry-well recovery) timer. When the timer expires or power is removed and reapplied, the PumpSaver®Plus reactivates its output relay and turns ...

Radon being soluble in water enters the underground water supply easily. All groundwater has radon and some have very high concentrations. Radon that enters a home through the water supply escapes from the water when flushed, heated or sprayed in showers, dishwashers, and clothes washers. In homes with a private well, radon entering from the water can raise the radon in air to very high levels and breathing this air for long periods can increase the risk of lung cancer. well water radon test concentrations commonly are much higher in water than in air. As a general rule, a measurement of 10,000 pCi/L radon in well water will contribute to 1 pCi/L throughout the household air. well water radon test New design features include: High quality 1/2HP Starite submersible pump Self-priming pump set up Failsafe floats and valves Quick-connect shark bite fittings Tank made of FDA approved materials Versatile electrical connections: The ele...

Aqua Science is one of the Nation's largest source for Water Well Pumps, Pressure tanks, Pressure Booster Systems, Drinking Water Systems, Cartridge Filters, Fleck Water Softeners, pH neutralizers, Radon mitigation systems . Aqua Science offers continuous lengths of Polyethylene Well Pipe from 100 to 600 feet in two different pressure ratings, 160 PSI and 200 PSI. The pipe we offer is perfect for submersible wells, irrigation systems or any other water system you are building or replacing. Both types of poly pipe are NSF certified and ready to ship! Why Choosing Well Pipe When installing a submersible pump it is important to select pipe that has a pressure rating that matches or exceeds the working pressure that will exist in the well. Two factors are used to determine Working Pressure: 1.      Number of feet from the pressure tank to the pumping water level (One Foot of Water Depth = .433 PSI) 2.      The setting of the tank pre...

Grundfos Booster pumps are used in applications where the normal system pressure is low and needs to be increased. These pumps are specifically designed for boosting water pressure in municipal and well water systems, rainwater collection systems, and garden and irrigation applications. The CMBE Booster is designed for domestic and commercial water supply, pressure boosting, irrigation, and dewatering applications. The CMBE series is available in both 1x110-120V (Grundfos 98810910) and 1x200-240V (Grundfos 98548109) variants and uses energy-efficient, permanent magnet motor technology, which provides unmatched reliability, quiet operation, and energy savings. Thanks to the integrated speed controller, the CMBE keeps a constant pressure in the pipe system. A pressure sensor monitoring discharge pressure will signal to the speed controller to change the motor speed to adapt the performance to the new situation. Features: Constant pressure via integrated speed contro...